Adaptec 8405 Cooler

Below is a 3D model of an Adaptec 8405 cooler. The model can be rotated and moved using your mouse.
This cooler is designed to slide onto the PCB, with a 60mm fan mounted at the rear.
It directs airflow out of the computer case through the PCIe slot and supports connections for a single SAS cable and a single battery backup unit.
The cooler can be 3D printed using standard materials, as the PCB does not generate significant heat.
Please note: supports may be required in the fan area and around the screw mounts during printing.

To demonstrate the cooler in action, several images are embedded within a standard ATX case.
The motherboard used is in a proprietary format and slightly smaller than standard ATX size.
Please note that the cooler is quite long, so be mindful of its size!